Webshop

Ce kit contient plus de 1,5 m de bande de roulement de réservoir. Utilisez cette bande de roulement pour construire des chenilles de robot capables de surmonter des terrains difficiles, ou pour construire un tapis roulant permettant de ramasser des objets. Le kit de mise à niveau de la bande de...

(2) VersaHex Adapters are required per Flex Wheel. 

(2) VersaHex Adapters are required per Flex Wheel.

(2) VersaHex Adapters are required per Flex Wheel.

This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to mechanical advantage. Lift, lower, hang, drag and more. Configurable for many applications. Ratchet and Pawl can be engaged to prevent back driving.

Ces valises sont destinées aux tuiles de terrain VEX en mousse. Le sac est muni d'une fermeture éclair et de deux grandes poignées. Chaque sac est conçu pour contenir jusqu'à 18 tuiles, soit la moitié d'un terrain de jeu de la compétition de robotique VEX. Remarque : les tuiles ne sont pas...

Utilisez le poids pour volant d'inertie pour empêcher vos roues de propulsion de perdre de la vitesse après le tir. Ces volants d'inertie ont des trous conçus pour fonctionner sur le terrain du V5.

Une bonne défense ne permet pas toujours de remporter des championnats, contrairement à la capacité de mouvements. Impose plus de puissance sur le terrain grâce à notre large gamme d’options de roues disponibles pour les constructeurs.Les roues omnidirectionnelles ou mecanum sont parfaites pour...

Un assortiment de câbles de rechange pour le Robot V5. Ces câbles relient le cerveau du Robot V5 à la batterie Li-Ion 1100mAh. Ces câbles sont disponibles en trois tailles : 180 mm; 300 mm; 500 mm

These plates are found in many game kits from past years, including Over Under (2023-24), and can be re-used if you already have them. If you do NOT have these plates, be sure to order (1x) Field Element Plate Kit (276-9091) for every (1x) Full Game & Field Element Kit (276-8868) you purchase.

Plastic mounting clip for attaching a V5 Robot Battery Li-Ion 1100mAh onto your robot. Mount two clips to the robot and simply snap your V5 Battery in and out.

These plastic retainers prevent hex standoffs from rotating. With a center hole sized to securely fit a Hex Nut, a Standoff can be tightened without the need for a wrench or pliers. When mounted, they provide multiple points of contact on structural components for stability.

High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction. VEX V5 2", 3", and 4" High...

High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction. VEX V5 2", 3", and 4" High...

High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction. VEX V5 2", 3", and 4" High...

High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction. VEX V5 2", 3", and 4" High...

High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to position objects on a shaft while reducing friction. VEX V5 2", 3", and 4" High...

VEX Square Drive Shafts have rounded corners which allow them to easily spin in a round hole, while locking into a square hole. Insert these into a motor to power all of your applications. Use the 12" to make your own custom length shafts Works with motors, wheels, gears, and bearings